{"title":"Optics ready plates for CZ","description":"\u003cp\u003eThe CZ P-10 series — P-10C, P-10F, P-10S — and the Shadow 2 OR all feature factory optics cuts designed for standard adapter plates. The P-10 models use the same basic cut geometry across the family, while the Shadow 2 OR has its own profile. Both accept a range of red dot footprints via the appropriate plate.\u003c\/p\u003e\n\u003cp\u003eA slide-mounted red dot lets you aim with both eyes open and pick up the aiming point faster than iron sights, then hold it through recoil — which is why most competitors move to one. The plate is the part that makes it work: it bridges the CZ's mounting interface to the footprint of your chosen optic and keeps it sitting low and rigid over the bore.\u003c\/p\u003e\n\u003cp\u003eCompatibility is set by the CZ's mounting cut on one side and your optic's footprint on the other — both have to match the plate. Where a co-witness iron matters, look for a plate with an integrated rear sight. Always confirm the exact fit on the individual product page before ordering.\u003c\/p\u003e","products":[{"product_id":"cz-p-10-optics-ready-plate-trijicon-rmr-footprint","title":"CZ P-10 Optics Ready plate | Trijicon RMR footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ P-10C, CZ P-10F and CZ P-10S, compatible with any red dot sight built to the Trijicon RMR footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrijicon RMR footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the Czech Republic by CZ.\u003c\/p\u003e","brand":"CZ","offers":[{"title":"Default Title","offer_id":54188913099093,"sku":"1091-1410-01","price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-p-10-optics-ready-plate-trijicon-rmr-footprint-ubitzu-187.jpg?v=1782553248"},{"product_id":"cz-p-10-optics-ready-plate-leupold-delta-point-pro","title":"CZ P-10 Optics Ready plate | Leupold DPP footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ P-10C, CZ P-10F and CZ P-10S, compatible with any red dot sight built to the Leupold DPP footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeupold DPP footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the Czech Republic by CZ.\u003c\/p\u003e","brand":"CZ","offers":[{"title":"Default Title","offer_id":54188913066325,"sku":"1091-1410-05","price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-p-10-optics-ready-plate-leupold-dpp-footprint-ubitzu-731.jpg?v=1782553253"},{"product_id":"cz-p-10-optics-ready-plate-vortex-venom-footprint","title":"CZ P-10 Optics Ready plate | Docter footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ P-10C, CZ P-10F and CZ P-10S, compatible with any red dot sight built to the Docter footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocter footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the Czech Republic by CZ.\u003c\/p\u003e","brand":"CZ","offers":[{"title":"Default Title","offer_id":54188913131861,"sku":"1091-1410-03","price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-p-10-optics-ready-plate-docter-footprint-ubitzu-430.jpg?v=1782553258"},{"product_id":"cz-shadow-2-optics-ready-plate-trijicon-rmr-footprint","title":"CZ Shadow 2 Optics Ready plate | Trijicon RMR footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ Shadow 2 and CZ Shadow 2 Compact, compatible with any red dot sight built to the Trijicon RMR footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrijicon RMR footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the Czech Republic by CZ.\u003c\/p\u003e","brand":"CZ","offers":[{"title":"Default Title","offer_id":54188913164629,"sku":"1091-1420-01","price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-shadow-2-optics-ready-plate-trijicon-rmr-footprint-ubitzu-611.jpg?v=1782553262"},{"product_id":"cz-p-10-optics-ready-plate-vortex-razor","title":"CZ P-10 Optics Ready plate | Vortex Razor footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ P-10C, CZ P-10F and CZ P-10S, compatible with any red dot sight built to the Vortex Razor footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVortex Razor footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the Czech Republic by CZ.\u003c\/p\u003e","brand":"CZ","offers":[{"title":"Default Title","offer_id":54188913295701,"sku":"1091-1410-02","price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-p-10-optics-ready-plate-vortex-razor-footprint-ubitzu-803.jpg?v=1782553267"},{"product_id":"cz-p-10-optics-ready-plate-shield-rmsc-footprint","title":"CZ P-10 Optics Ready plate | Shield RMSc \u0026 Holosun K-series footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ P-10C, CZ P-10F and CZ P-10S, compatible with any red dot sight built to the Shield RMSc or Holosun K-series footprints — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield RMSc \u0026amp; Holosun K-series footprints\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the Czech Republic by CZ.\u003c\/p\u003e","brand":"CZ","offers":[{"title":"Default Title","offer_id":54188913328469,"sku":"1091-1410-06","price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-p-10-optics-ready-plate-shield-rmsc-holosun-k-series-footprint-ubitzu-820.jpg?v=1782632205"},{"product_id":"cz-p-10-optics-ready-plate-c-more-rts-footprint","title":"CZ P-10 Optics Ready plate | C-More RTS footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ P-10C, CZ P-10F and CZ P-10S, compatible with any red dot sight built to the C-More RTS footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eC-More RTS footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the Czech Republic by CZ.\u003c\/p\u003e","brand":"CZ","offers":[{"title":"Default Title","offer_id":54188913361237,"sku":"1091-1410-09","price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-p-10-optics-ready-plate-c-more-rts-footprint-ubitzu-689.jpg?v=1782553276"},{"product_id":"cz-p-10-optics-ready-plate-aimpoint-acro","title":"CZ P-10 Optics Ready plate | Aimpoint Acro footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ P-10C, CZ P-10F and CZ P-10S, compatible with any red dot sight built to the Aimpoint Acro footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAimpoint Acro footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the Czech Republic by CZ.\u003c\/p\u003e","brand":"CZ","offers":[{"title":"Default Title","offer_id":54188913394005,"sku":"1091-1410-08","price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-p-10-optics-ready-plate-aimpoint-acro-footprint-ubitzu-258.jpg?v=1782553281"},{"product_id":"cz-shadow-2-optics-ready-plate-shield-rmsc-footprint","title":"CZ Shadow 2 Optics Ready plate | Shield RMSc \u0026 Holosun K-series footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ Shadow 2 and CZ Shadow 2 Compact, compatible with any red dot sight built to the Shield RMSc or Holosun K-series footprints — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield RMSc \u0026amp; Holosun K-series footprints\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the Czech Republic by CZ.\u003c\/p\u003e","brand":"CZ","offers":[{"title":"Default Title","offer_id":54188913787221,"sku":"1091-1420-06","price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-shadow-2-optics-ready-plate-shield-rmsc-holosun-k-series-footprint-ubitzu-926.jpg?v=1782632216"},{"product_id":"cz-shadow-2-optics-ready-plate-vortex-venom-footprint","title":"CZ Shadow 2 Optics Ready plate | Docter footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ Shadow 2 and CZ Shadow 2 Compact, compatible with any red dot sight built to the Docter footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocter footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the Czech Republic by CZ.\u003c\/p\u003e","brand":"CZ","offers":[{"title":"Default Title","offer_id":54188913819989,"sku":"1091-1420-04","price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-shadow-2-optics-ready-plate-docter-footprint-ubitzu-453.jpg?v=1782553290"},{"product_id":"cz-shadow-2-optics-ready-plate-leupold-delta-point-pro","title":"CZ Shadow 2 Optics Ready plate | Leupold DPP footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ Shadow 2 and CZ Shadow 2 Compact, compatible with any red dot sight built to the Leupold DPP footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeupold DPP footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the Czech Republic by CZ.\u003c\/p\u003e","brand":"CZ","offers":[{"title":"Default Title","offer_id":54188913852757,"sku":"1091-1420-05","price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-shadow-2-optics-ready-plate-leupold-dpp-footprint-ubitzu-455.jpg?v=1782553295"},{"product_id":"cz-shadow-2-optics-ready-plate-c-more-rts-footprint","title":"CZ Shadow 2 Optics Ready plate | C-More RTS footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ Shadow 2 and CZ Shadow 2 Compact, compatible with any red dot sight built to the C-More RTS footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eC-More RTS footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the Czech Republic by CZ.\u003c\/p\u003e","brand":"CZ","offers":[{"title":"Default Title","offer_id":54188913885525,"sku":"1091-1420-08","price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-shadow-2-optics-ready-plate-c-more-rts-footprint-ubitzu-908.jpg?v=1782553299"},{"product_id":"cz-shadow-2-optics-ready-plate-universal-type-a","title":"CZ Shadow 2 Optics Ready plate | type A [RMSc, DPP, Docter footprint]","description":"\u003cp\u003eAluminium optics ready plate for the factory optics-cut CZ Shadow 2 and CZ Shadow 2 Compact, compatible with any red dot sight built to the RMSc, DPP or Docter footprints — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRMSc, DPP \u0026amp; Docter footprints\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined aluminium\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in Italy by Toni System.\u003c\/p\u003e","brand":"Toni System","offers":[{"title":"Default Title","offer_id":54188913918293,"sku":"OPXRCZA","price":85.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-shadow-2-optics-ready-plate-type-a-rmsc-dpp-docter-footprint-ubitzu-957.jpg?v=1782632224"},{"product_id":"screws-for-cz-red-dot-plates","title":"Screws for CZ Optics Ready plates | 2pcs","description":"\u003cp\u003eReplacement mounting screws for CZ optics ready plates, supplied as a set of two.\u003c\/p\u003e\n\u003cp\u003eCut to the correct thread specification for a secure installation torqued to spec.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrect thread spec\u003c\/strong\u003e – matched to the mounting holes on CZ optics ready plates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet of two\u003c\/strong\u003e – complete hardware to mount a single plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel construction\u003c\/strong\u003e – holds securely at the recommended torque\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the Czech Republic by CZ.\u003c\/p\u003e","brand":"CZ","offers":[{"title":"Default Title","offer_id":54188913951061,"sku":"1091-1400","price":6.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/screws-for-cz-optics-ready-plates-2pcs-ubitzu-629.jpg?v=1782553309"},{"product_id":"cz-p-10-optics-ready-plate-holosun-k-series-footprint","title":"CZ P-10 Optics Ready plate | Holosun K-series footprint","description":"\u003cp\u003eAluminium optics ready plate for the factory optics-cut CZ P-10C, CZ P-10F and CZ P-10S, compatible with any red dot sight built to the Holosun K-series footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolosun K-series footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined aluminium\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the USA by Holosun.\u003c\/p\u003e","brand":"Holosun","offers":[{"title":"Default Title","offer_id":54188913983829,"sku":"PLT-HS407K-507K","price":70.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-p-10-optics-ready-plate-holosun-k-series-footprint-ubitzu-958.jpg?v=1782553314"},{"product_id":"cz-shadow-2-optics-ready-plate-universal-type-e","title":"CZ Shadow 2 Optics Ready plate | type E [RTS \u0026 Razor footprint]","description":"\u003cp\u003eAluminium optics ready plate for the factory optics-cut CZ Shadow 2 and CZ Shadow 2 Compact, compatible with any red dot sight built to the RTS or Razor footprints — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRTS \u0026amp; Razor footprints\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined aluminium\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in Italy by Toni System.\u003c\/p\u003e","brand":"Toni System","offers":[{"title":"Default Title","offer_id":54188914016597,"sku":"OPXRCZE","price":85.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-shadow-2-optics-ready-plate-type-e-rts-razor-footprint-ubitzu-341.jpg?v=1782553318"},{"product_id":"cz-p-10-optics-ready-plate-holosun-509t","title":"CZ P-10 Optics Ready plate | Holosun 509T footprint","description":"\u003cp\u003eAluminium optics ready plate for the factory optics-cut CZ P-10C, CZ P-10F and CZ P-10S, compatible with any red dot sight built to the Holosun 509T footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolosun 509T footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined aluminium\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the USA by Holosun.\u003c\/p\u003e","brand":"Holosun","offers":[{"title":"Default Title","offer_id":54188914409813,"sku":"PLT-HS509T","price":70.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-p-10-optics-ready-plate-holosun-509t-footprint-ubitzu-683.jpg?v=1782553323"},{"product_id":"cz-shadow-2-optics-ready-red-dot-plate-universal-type-c","title":"CZ Shadow 2 Optics Ready plate | type C [RMR, RTS, Docter footprint]","description":"\u003cp\u003eAluminium optics ready plate for the factory optics-cut CZ Shadow 2 and CZ Shadow 2 Compact, compatible with any red dot sight built to the RMR, RTS or Docter footprints — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRMR, RTS \u0026amp; Docter footprints\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined aluminium\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the USA by Outer Impact.\u003c\/p\u003e","brand":"Outer Impact","offers":[{"title":"Default Title","offer_id":54188917621077,"sku":"OTL-RDM-CZ06a","price":85.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-shadow-2-optics-ready-plate-type-c-rmr-rts-docter-footprint-ubitzu-311.jpg?v=1782632306"},{"product_id":"cz-shadow-2-optics-ready-plate-trijicon-rmr-footprint-1","title":"CZ Shadow 2 Optics Ready plate | Trijicon RMR footprint","description":"\u003cp\u003eAircraft-grade aluminium optics ready plate for the factory optics-cut CZ Shadow 2 and CZ Shadow 2 Compact, compatible with any red dot sight built to the Trijicon RMR footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrijicon RMR footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined aircraft-grade aluminium\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in Poland by 2BME.\u003c\/p\u003e","brand":"2BME","offers":[{"title":"Default Title","offer_id":54188917719381,"sku":"2BME020","price":92.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-shadow-2-optics-ready-plate-trijicon-rmr-footprint-ubitzu-401.jpg?v=1782553444"},{"product_id":"cz-p-10-optics-ready-plate-holosun-k-series-footprint-1","title":"CZ P-10 Optics Ready plate | Holosun K-series footprint","description":"\u003cp\u003eAircraft-grade aluminium optics ready plate for the factory optics-cut CZ P-10C, CZ P-10F and CZ P-10S, compatible with any red dot sight built to the Holosun K-series footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolosun K-series footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined aircraft-grade aluminium\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in Poland by 2BME.\u003c\/p\u003e","brand":"2BME","offers":[{"title":"Default Title","offer_id":54188917752149,"sku":"2BME027","price":92.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-p-10-optics-ready-plate-holosun-k-series-footprint-ubitzu-893.jpg?v=1782553449"},{"product_id":"cz-shadow-2-optics-ready-plate-trijicon-rmr-footprint-2","title":"CZ Shadow 2 Optics Ready plate | Trijicon RMR footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ Shadow 2 and CZ Shadow 2 Compact, compatible with any red dot sight built to the Trijicon RMR footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrijicon RMR footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in Estonia by Eemann Tech.\u003c\/p\u003e","brand":"Eemann Tech","offers":[{"title":"Default Title","offer_id":54188919718229,"sku":"ET-130152","price":65.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-shadow-2-optics-ready-plate-trijicon-rmr-footprint-ubitzu-575.jpg?v=1782553672"},{"product_id":"cz-shadow-2-optics-ready-plate-vortex-venom-footprint-1","title":"CZ Shadow 2 Optics Ready plate | Docter footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ Shadow 2 and CZ Shadow 2 Compact, compatible with any red dot sight built to the Docter footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocter footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in Estonia by Eemann Tech.\u003c\/p\u003e","brand":"Eemann Tech","offers":[{"title":"Default Title","offer_id":54188919750997,"sku":"ET-130150","price":65.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-shadow-2-optics-ready-plate-docter-footprint-ubitzu-505.jpg?v=1782553676"},{"product_id":"cz-shadow-2-optics-ready-plate-leupold-delta-point-pro-1","title":"CZ Shadow 2 Optics Ready plate | Leupold DPP footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ Shadow 2 and CZ Shadow 2 Compact, compatible with any red dot sight built to the Leupold DPP footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeupold DPP footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in Estonia by Eemann Tech.\u003c\/p\u003e","brand":"Eemann Tech","offers":[{"title":"Default Title","offer_id":54188919816533,"sku":"ET-130153","price":65.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-shadow-2-optics-ready-plate-leupold-dpp-footprint-ubitzu-878.jpg?v=1782553688"},{"product_id":"cz-shadow-2-optics-ready-plate-shield-rmsc-footprint-1","title":"CZ Shadow 2 Optics Ready plate | Shield RMSc footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ Shadow 2 and CZ Shadow 2 Compact, compatible with any red dot sight built to the Shield RMSc footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield RMSc footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in Estonia by Eemann Tech.\u003c\/p\u003e","brand":"Eemann Tech","offers":[{"title":"Default Title","offer_id":54188921258325,"sku":"ET-130154","price":65.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-shadow-2-optics-ready-plate-shield-rmsc-footprint-ubitzu-357.webp?v=1782553765"},{"product_id":"cz-shadow-2-optics-ready-plate-c-more-rts-footprint-1","title":"CZ Shadow 2 Optics Ready plate | C-More RTS footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ Shadow 2 and CZ Shadow 2 Compact, compatible with any red dot sight built to the C-More RTS footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eC-More RTS footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in Estonia by Eemann Tech.\u003c\/p\u003e","brand":"Eemann Tech","offers":[{"title":"Default Title","offer_id":54188921291093,"sku":"ET-130151","price":65.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-shadow-2-optics-ready-plate-c-more-rts-footprint-ubitzu-681.webp?v=1782553770"},{"product_id":"cz-shadow-2-optics-ready-plate-universal-type-d","title":"CZ Shadow 2 Optics Ready plate | type D [Docter, Romeo1 footprint]","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ Shadow 2 and CZ Shadow 2 Compact, compatible with any red dot sight built to the Docter or Romeo1 footprints — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocter \u0026amp; Romeo1 footprints\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in Estonia by Eemann Tech.\u003c\/p\u003e","brand":"Eemann Tech","offers":[{"title":"Default Title","offer_id":54188921323861,"sku":"ET-130132","price":65.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-shadow-2-optics-ready-plate-type-d-docter-romeo1-footprint-ubitzu-718.webp?v=1782632522"},{"product_id":"cz-shadow-2-optics-ready-plate-aimpoint-acro","title":"CZ Shadow 2 Optics Ready plate | Aimpoint Acro","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ Shadow 2 and CZ Shadow 2 Compact, compatible with any red dot sight built to the Aimpoint Acro footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAimpoint Acro footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the Czech Republic by CZ.\u003c\/p\u003e","brand":"CZ","offers":[{"title":"Default Title","offer_id":54188921749845,"sku":"1091-1420-03","price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-shadow-2-optics-ready-plate-aimpoint-acro-ubitzu-598.jpg?v=1782553831"},{"product_id":"cz-shadow-2-optics-ready-plate-with-sights-trijicon-rmr-footprint","title":"CZ Shadow 2 Optics Ready plate with integrated rear sight | Trijicon RMR footprint","description":"\u003cp\u003eSteel optics ready plate with an integrated rear sight for the factory optics-cut CZ Shadow 2 and CZ Shadow 2 Compact, compatible with any red dot sight built to the Trijicon RMR footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eThe plate bridges the factory optics cut to the optic and seats it low and flush, while a rear sight machined into the plate body keeps a usable co-witness iron sight without adding stack height. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated rear sight\u003c\/strong\u003e – machined into the plate body for a co-witness iron sight, with no separate sight and no added height\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrijicon RMR footprint\u003c\/strong\u003e – accepts any sight built to this footprint, not a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the USA by Impact Machine.\u003c\/p\u003e","brand":"Impact Machine","offers":[{"title":"Default Title","offer_id":54188922339669,"sku":"1030","price":118.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-shadow-2-optics-ready-plate-with-integrated-rear-sight-trijicon-rmr-footprint-ubitzu-526.jpg?v=1782632580"},{"product_id":"cz-shadow-2-optics-ready-plate-holosun-509t","title":"CZ Shadow 2 Optics Ready plate | Holosun 509T","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ Shadow 2 and CZ Shadow 2 Compact, compatible with any red dot sight built to the Holosun 509T footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolosun 509T footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the USA by Impact Machine.\u003c\/p\u003e","brand":"Impact Machine","offers":[{"title":"Default Title","offer_id":54188922372437,"sku":"1020","price":98.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-shadow-2-optics-ready-plate-holosun-509t-ubitzu-217.jpg?v=1782553909"},{"product_id":"cz-shadow-2-optics-ready-plate-holosun-k-series-shield-rmsc-footprint","title":"CZ Shadow 2 Optics Ready plate with integrated rear sight | type S [RMSc, DPP, K-series footprint]","description":"\u003cp\u003eSteel optics ready plate with an integrated rear sight for the factory optics-cut CZ Shadow 2 and CZ Shadow 2 Compact, compatible with any red dot sight built to the RMSc, DPP or K-series footprints — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eThe plate bridges the factory optics cut to the optic and seats it low and flush, while a rear sight machined into the plate body keeps a usable co-witness iron sight without adding stack height. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated rear sight\u003c\/strong\u003e – machined into the plate body for a co-witness iron sight, with no separate sight and no added height\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRMSc, DPP \u0026amp; K-series footprints\u003c\/strong\u003e – accepts any sight built to this footprint, not a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the USA by Impact Machine.\u003c\/p\u003e","brand":"Impact Machine","offers":[{"title":"Default Title","offer_id":54188922503509,"sku":"1035","price":118.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-shadow-2-optics-ready-plate-with-integrated-rear-sight-type-s-rmsc-dpp-k-series-footprint-ubitzu-373.jpg?v=1782632586"},{"product_id":"cz-shadow-2-optics-ready-plate-with-forward-sights-trijicon-rmr-footprint","title":"CZ Shadow 2 Optics Ready plate with integrated forwarded rear sight | Trijicon RMR footprint","description":"\u003cp\u003eSteel optics ready plate with an integrated forward-mounted rear sight for the factory optics-cut CZ Shadow 2 and CZ Shadow 2 Compact, compatible with any red dot sight built to the Trijicon RMR footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eThe plate bridges the factory optics cut to the optic and seats it low and flush, while a rear sight machined forward on the slide into the plate body keeps a usable co-witness iron sight without adding stack height. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated rear sight\u003c\/strong\u003e – machined into the plate body for a co-witness iron sight, with no separate sight and no added height\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrijicon RMR footprint\u003c\/strong\u003e – accepts any sight built to this footprint, not a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the USA by Impact Machine.\u003c\/p\u003e","brand":"Impact Machine","offers":[{"title":"Default Title","offer_id":54188922536277,"sku":"1040","price":118.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-shadow-2-optics-ready-plate-with-integrated-forwarded-rear-sight-trijicon-rmr-footprint-ubitzu-511.jpg?v=1782632595"},{"product_id":"cz-p-10-optics-ready-plate-holosun-k-series-footprint-2","title":"CZ P-10 Optics Ready plate | Holosun K-series footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ P-10C, CZ P-10F and CZ P-10S, compatible with any red dot sight built to the Holosun K-series footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolosun K-series footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the Czech Republic by Evo Arms.\u003c\/p\u003e","brand":"Evo Arms","offers":[{"title":"Default Title","offer_id":54188923224405,"sku":"TZP10K","price":62.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-p-10-optics-ready-plate-holosun-k-series-footprint-ubitzu-866.jpg?v=1782553972"},{"product_id":"cz-p-10-optics-ready-plate-trijicon-rmr-footprint-1","title":"CZ P-10 Optics Ready plate | Trijicon RMR footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ P-10C, CZ P-10F and CZ P-10S, compatible with any red dot sight built to the Trijicon RMR footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrijicon RMR footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the Czech Republic by Evo Arms.\u003c\/p\u003e","brand":"Evo Arms","offers":[{"title":"Default Title","offer_id":54188923322709,"sku":"TZP10T","price":62.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-p-10-optics-ready-plate-trijicon-rmr-footprint-ubitzu-204.jpg?v=1782553977"},{"product_id":"cz-p-10-optics-ready-plate-vortex-venom-footprint-1","title":"CZ P-10 Optics Ready plate | Docter footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ P-10C, CZ P-10F and CZ P-10S, compatible with any red dot sight built to the Docter footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocter footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the Czech Republic by Evo Arms.\u003c\/p\u003e","brand":"Evo Arms","offers":[{"title":"Default Title","offer_id":54188923355477,"sku":"TZP10V","price":62.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-p-10-optics-ready-plate-docter-footprint-ubitzu-395.jpg?v=1782553983"},{"product_id":"cz-p-10-optics-ready-plate-shield-rmsc-footprint-1","title":"CZ P-10 Optics Ready plate | Shield RMSc footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ P-10C, CZ P-10F and CZ P-10S, compatible with any red dot sight built to the Shield RMSc footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield RMSc footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the Czech Republic by Evo Arms.\u003c\/p\u003e","brand":"Evo Arms","offers":[{"title":"Default Title","offer_id":54188924305749,"sku":"TZP10S","price":62.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-p-10-optics-ready-plate-shield-rmsc-footprint-ubitzu-835.jpg?v=1782553989"},{"product_id":"cz-shadow-2-optics-ready-plate-shield-rmsc-footprint-2","title":"CZ Shadow 2 Optics Ready plate | Shield RMSc footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ Shadow 2 and CZ Shadow 2 Compact, compatible with any red dot sight built to the Shield RMSc footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield RMSc footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the Czech Republic by Evo Arms.\u003c\/p\u003e","brand":"Evo Arms","offers":[{"title":"Default Title","offer_id":54188925288789,"sku":"TZSWS","price":62.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-shadow-2-optics-ready-plate-shield-rmsc-footprint-ubitzu-668.jpg?v=1782554036"},{"product_id":"cz-shadow-2-optics-ready-plate-holosun-k-series-footprint","title":"CZ Shadow 2 Optics Ready plate | Holosun K-series footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ Shadow 2 and CZ Shadow 2 Compact, compatible with any red dot sight built to the Holosun K-series footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolosun K-series footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the Czech Republic by Evo Arms.\u003c\/p\u003e","brand":"Evo Arms","offers":[{"title":"Default Title","offer_id":54188925452629,"sku":"TZSWK","price":62.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-shadow-2-optics-ready-plate-holosun-k-series-footprint-ubitzu-406.jpg?v=1782554044"},{"product_id":"cz-shadow-2-optics-ready-plate-trijicon-rmr-footprint-3","title":"CZ Shadow 2 Optics Ready plate | Trijicon RMR footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ Shadow 2 and CZ Shadow 2 Compact, compatible with any red dot sight built to the Trijicon RMR footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrijicon RMR footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the Czech Republic by Evo Arms.\u003c\/p\u003e","brand":"Evo Arms","offers":[{"title":"Default Title","offer_id":54188925485397,"sku":"TZSWT","price":62.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-shadow-2-optics-ready-plate-trijicon-rmr-footprint-ubitzu-960.jpg?v=1782554049"},{"product_id":"cz-shadow-2-optics-ready-plate-vortex-venom-footprint-2","title":"CZ Shadow 2 Optics Ready plate | Docter footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ Shadow 2 and CZ Shadow 2 Compact, compatible with any red dot sight built to the Docter footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocter footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the Czech Republic by Evo Arms.\u003c\/p\u003e","brand":"Evo Arms","offers":[{"title":"Default Title","offer_id":54188925518165,"sku":"TZWSV","price":62.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-shadow-2-optics-ready-plate-docter-footprint-ubitzu-479.jpg?v=1782554053"},{"product_id":"cz-p-10-optics-ready-plate-shield-rmsc-footprint-2","title":"CZ P-10 Optics Ready plate | Shield RMSc footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ P-10C, CZ P-10F and CZ P-10S, compatible with any red dot sight built to the Shield RMSc footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield RMSc footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in Estonia by Eemann Tech.\u003c\/p\u003e","brand":"Eemann Tech","offers":[{"title":"Default Title","offer_id":54188926370133,"sku":"ET-130158","price":65.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-p-10-optics-ready-plate-shield-rmsc-footprint-ubitzu-534.jpg?v=1782554145"},{"product_id":"cz-p-10-optics-ready-plate-holosun-k-series-footprint-3","title":"CZ P-10 Optics Ready plate | Holosun K-series footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ P-10C, CZ P-10F and CZ P-10S, compatible with any red dot sight built to the Holosun K-series footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolosun K-series footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in Estonia by Eemann Tech.\u003c\/p\u003e","brand":"Eemann Tech","offers":[{"title":"Default Title","offer_id":54188926402901,"sku":"ET-130156","price":65.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-p-10-optics-ready-plate-holosun-k-series-footprint-ubitzu-771.jpg?v=1782554150"},{"product_id":"cz-p-10-optics-ready-plate-trijicon-rmr-footprint-2","title":"CZ P-10 Optics Ready plate | Trijicon RMR footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ P-10C, CZ P-10F and CZ P-10S, compatible with any red dot sight built to the Trijicon RMR footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrijicon RMR footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in Estonia by Eemann Tech.\u003c\/p\u003e","brand":"Eemann Tech","offers":[{"title":"Default Title","offer_id":54188926566741,"sku":"ET-130157","price":65.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-p-10-optics-ready-plate-trijicon-rmr-footprint-ubitzu-788.jpg?v=1782554154"},{"product_id":"cz-p-10-optics-ready-plate-vortex-venom-footprint-2","title":"CZ P-10 Optics Ready plate | Docter footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ P-10C, CZ P-10F and CZ P-10S, compatible with any red dot sight built to the Docter footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocter footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in Estonia by Eemann Tech.\u003c\/p\u003e","brand":"Eemann Tech","offers":[{"title":"Default Title","offer_id":54188926599509,"sku":"ET-130159","price":65.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-p-10-optics-ready-plate-docter-footprint-ubitzu-751.jpg?v=1782554159"},{"product_id":"cz-shadow-2-optics-ready-plate-universal-type-s","title":"CZ Shadow 2 Optics Ready plate | type S [RMR \u0026 RTS footprint]","description":"\u003cp\u003eAluminium optics ready plate for the factory optics-cut CZ Shadow 2 and CZ Shadow 2 Compact, compatible with any red dot sight built to the RMR or RTS footprints — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRMR \u0026amp; RTS footprints\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined aluminium\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in Italy by Toni System.\u003c\/p\u003e","brand":"Toni System","offers":[{"title":"Default Title","offer_id":54188926665045,"sku":"OPXRCZS","price":85.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-shadow-2-optics-ready-plate-type-s-rmr-rts-footprint-ubitzu-636.jpg?v=1782554163"},{"product_id":"cz-p-10-optics-ready-plate-leupold-delta-point-pro-1","title":"CZ P-10 Optics Ready plate | Leupold DPP footprint","description":"\u003cp\u003eAircraft-grade aluminium optics ready plate for the factory optics-cut CZ P-10C, CZ P-10F and CZ P-10S, compatible with any red dot sight built to the Leupold DPP footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeupold DPP footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined aircraft-grade aluminium\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in Poland by 2BME.\u003c\/p\u003e","brand":"2BME","offers":[{"title":"Default Title","offer_id":54188930990421,"sku":"2BME037","price":92.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-p-10-optics-ready-plate-leupold-dpp-footprint-ubitzu-278.webp?v=1782554377"},{"product_id":"cz-shadow-2-optics-ready-plate-leupold-dpp-footprint","title":"CZ Shadow 2 Optics Ready plate | Leupold DPP footprint","description":"\u003cp\u003eAircraft-grade aluminium optics ready plate for the factory optics-cut CZ Shadow 2 and CZ Shadow 2 Compact, compatible with any red dot sight built to the Leupold DPP footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeupold DPP footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined aircraft-grade aluminium\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in Poland by 2BME.\u003c\/p\u003e","brand":"2BME","offers":[{"title":"Default Title","offer_id":54188931023189,"sku":"2BME036","price":92.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-shadow-2-optics-ready-plate-leupold-dpp-footprint-ubitzu-204.webp?v=1782554386"},{"product_id":"cz-p-10-optics-ready-plate-holosun-k-series-footprint-4","title":"CZ P-10 Optics Ready plate | Holosun K-series footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ P-10C, CZ P-10F and CZ P-10S, compatible with any red dot sight built to the Holosun K-series footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolosun K-series footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the Czech Republic by Perfect Parts.\u003c\/p\u003e","brand":"Perfect Parts","offers":[{"title":"Default Title","offer_id":54188932235605,"sku":"PORKS","price":74.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-p-10-optics-ready-plate-holosun-k-series-footprint-ubitzu-696.jpg?v=1782554414"},{"product_id":"cz-shadow-2-or-optic-plate-holosun-k-series-footprint","title":"CZ Shadow 2 Optics Ready plate | Holosun K-series footprint","description":"\u003cp\u003eSteel optics ready plate for the factory optics-cut CZ Shadow 2 and CZ Shadow 2 Compact, compatible with any red dot sight built to the Holosun K-series footprint — whatever the optic's brand.\u003c\/p\u003e\n\u003cp\u003eIt bridges the factory optics cut to the optic and holds it low and flush with no play or tilt. The full list of compatible pistols and red dot sights is below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHolosun K-series footprint\u003c\/strong\u003e – accepts any red dot built to this footprint, not just a single brand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fitment\u003c\/strong\u003e – mounts straight to the factory optics cut, no machining or gunsmithing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCNC-machined steel\u003c\/strong\u003e – tight tolerances for a rigid, recoil-stable lock-up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in Estonia by Eemann Tech.\u003c\/p\u003e","brand":"Eemann Tech","offers":[{"title":"Default Title","offer_id":54189058294101,"sku":"ET-130155","price":65.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/cz-shadow-2-optics-ready-plate-holosun-k-series-footprint-ubitzu-854.jpg?v=1782551411"},{"product_id":"holosun-scs-p-10","title":"Holosun SCS P-10","description":"\u003cp\u003eMade for CZ P-10 Optics Ready, the Holosun SCS P-10 sits directly on the factory optics cut — no plate in between.\u003c\/p\u003e\n\u003cp\u003eAiming is on a 2 MOA green dot with 32 MOA circle. The reticle pattern is switchable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment\u003c\/strong\u003e – Direct fit — CZ P-10 Optics Ready\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReticle\u003c\/strong\u003e – 2 MOA green dot with 32 MOA circle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWindow size\u003c\/strong\u003e – 14.7 x 19.5 mm [0.58 x 0.77\"]\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e – 53.3 x 29.2 x 23.1 mm [2.1 x 1.15 x 0.91\"]\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt-in features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwitchable reticle patterns\u003c\/li\u003e\n\u003cli\u003eSolar panel supplements the battery in good light\u003c\/li\u003e\n\u003cli\u003eRechargeable battery\u003c\/li\u003e\n\u003cli\u003eNight-vision-compatible brightness settings\u003c\/li\u003e\n\u003cli\u003eSealed to IP67 against water and dust\u003c\/li\u003e\n\u003cli\u003eMulti-coated lens\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Holosun","offers":[{"title":"Default Title","offer_id":54231724622165,"sku":"70159783","price":516.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/holosun-scs-p-10-ubitzu-909.jpg?v=1782553526"},{"product_id":"vector-optics-frenzy-1x20x24-for-cz-shadow-2-or","title":"Vector Optics Frenzy 1x20x24 for CZ Shadow 2 OR","description":"\u003cp\u003eThe Vector Optics Frenzy 1x20x24 for CZ Shadow 2 OR is a direct fit for CZ Shadow 2 Optics Ready — it seats straight onto the factory optics cut with no adapter plate.\u003c\/p\u003e\n\u003cp\u003eAiming is on a 3 MOA red dot. A multi-coated lens keeps the glass clear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment\u003c\/strong\u003e – Direct fit — CZ Shadow 2 Optics Ready\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReticle\u003c\/strong\u003e – 3 MOA red dot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWindow size\u003c\/strong\u003e – 20 x 24 mm [0.79 x 0.94\"]\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e – 51.0 x 27.0 x 26.0 mm [2.01 x 1.06 x 1.02\"]\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt-in features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-coated lens\u003c\/li\u003e\n\u003cli\u003eAluminium housing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Vector Optics","offers":[{"title":"Default Title","offer_id":54231809491285,"sku":"SCRD-82","price":209.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8105\/7877\/files\/vector-optics-frenzy-1x20x24-for-cz-shadow-2-or-ubitzu-989.jpg?v=1782555116"}],"url":"https:\/\/ubitzu.be\/fr\/collections\/optics-ready-plates-for-cz.oembed","provider":"Ubitzu","version":"1.0","type":"link"}